| Windows 8 DLL File Information - modemui.dll |
The following DLL report was generated by automatic DLL script that scanned and loaded all DLL files in the system32 directory of Windows 8, extracted the information from them, and then saved it into HTML reports. If you want to view a report of another DLL, go to the main page of this Web site.
General Information
| File Description: | Windows Modem Properties |
| File Version: | 6.2.9200.16384 (win8_rtm.120725-1247) |
| Company: | Microsoft Corporation |
| Product Name: | Microsoft® Windows® Operating System |
| DLL popularity | Very Low - There is no any other DLL in system32 directory that is statically linked to this file. |
| File Size: | 281 KB |
| Total Number of Exported Functions: | 14 |
| Total Number of Exported Functions With Names: | 14 |
Section Headers
| Name | Virtual Address | Raw Data Size | % of File | Characteristics | Section Contains... |
|---|---|---|---|---|---|
| .text | 0x00001000 | 69,120 Bytes | 24.0% | Read, Execute | Code |
| .data | 0x00012000 | 3,584 Bytes | 1.2% | Write, Read | Initialized Data |
| .idata | 0x00014000 | 5,120 Bytes | 1.8% | Read | Initialized Data |
| .rsrc | 0x00016000 | 203,264 Bytes | 70.6% | Read | Initialized Data |
| .reloc | 0x00048000 | 5,632 Bytes | 2.0% | Read, Discardable | Initialized Data |
Static Linking
modemui.dll is statically linked to the following files:msvcrt.dll
ADVAPI32.dll
KERNEL32.dll
ntdll.dll
SETUPAPI.dll
SHELL32.dll
USER32.dll
ole32.dll
OLEAUT32.dll
uniplat.dll
This means that when modemui.dll is loaded, the above files are automatically loaded too. If one of these files is corrupted or missing, modemui.dll won't be loaded.
General Resources Information
| Resource Type | Number of Items | Total Size | % of File |
|---|---|---|---|
| Icons | 5 | 198,038 Bytes | 68.8% |
| Animated Icons | 0 | 0 Bytes | 0.0% |
| Cursors | 0 | 0 Bytes | 0.0% |
| Animated Cursors | 0 | 0 Bytes | 0.0% |
| Bitmaps | 1 | 308 Bytes | 0.1% |
| AVI Files | 0 | 0 Bytes | 0.0% |
| Dialog-Boxes | 13 | 8,550 Bytes | 3.0% |
| HTML Related Files | 0 | 0 Bytes | 0.0% |
| Menus | 1 | 196 Bytes | 0.1% |
| Strings | 441 | 27,418 Bytes | 9.5% |
| Type Libraries | 0 | 0 Bytes | 0.0% |
| Manifest | 2 | 1,452 Bytes | 0.5% |
| All Others | 2 | 1,136 Bytes | 0.4% |
| Total | 465 | 237,098 Bytes | 82.4% |
Icons in this file
There are 5 icons stored in this DLL file. You can view all these icons in the following small thumbnail:
Cursors in this file
No cursors found in this file
Dialog-boxes list (up to 200 dialogs)
In the following section, you can find the captions of dialog-boxes stored in this DLL. The list is currently limited to 200 dialogs.| ID | Dialog Caption |
|---|---|
| 102 | Advanced |
| 117 | General |
| 119 | Distinctive Ring |
| 121 | Distinctive Ring |
| 122 | Diagnostics |
| 123 | Please Wait...... |
| 128 | General |
| 129 | Advanced |
| 130 | ISDN |
| 131 | Please Wait |
| 132 | Warning |
| 20011 | Modems |
| 20012 | Please Wait... |
String resources in this dll (up to 200 strings)
| String ID | String Text |
|---|---|
| 180 | RS-232 Serial Port |
| 181 | External Modem |
| 182 | Internal Modem |
| 183 | PCMCIA Modem |
| 184 | Parallel Modem |
| 185 | Parallel Port |
| 201 | 1200 |
| 202 | 2400 |
| 203 | 4800 |
| 204 | 9600 |
| 206 | 19200 |
| 207 | 38400 |
| 210 | 115200 |
| 211 | 57600 |
| 220 | 230400 |
| 221 | 460800 |
| 222 | 921600 |
| 250 | Even |
| 252 | None |
| 253 | Mark |
| 254 | Space |
| 260 | Xon / Xoff |
| 261 | Hardware |
| 262 | None |
| 265 | V.23 (Minitel) |
| 266 | Standard |
| 267 | Non-standard (Bell, HST) |
| 270 | Append to &Log |
| 300 | Unspecified |
| 301 | Data |
| 303 | Voice |
| 304 | None |
| 320 | Country/region setting updated |
| 340 | Modem |
| 341 | Modem Settings |
| 342 | Modem Address |
| 400 | Country/region setting not updated |
| 401 | Some modems do not accept user initialization commands greater than 57 characters. Information about this limitation can be obtained from your modem manufacturer |
| 402 | Warning |
| 460 | There is not enough memory to view the General dialog box. Close some files or programs, and then try again. |
| 461 | There is not enough memory to view the Modem Settings dialog box. Close some files or programs, and then try again. |
| 463 | Each calling address must be set to 'Automatic' or to a unique ring pattern. Change the duplicate ring pattern to a different one. |
| 465 | Standard EC |
| 466 | Forced EC |
| 467 | Cellular |
| 468 | Disabled |
| 469 | Enabled |
| 470 | Disabled |
| 480 | AUTO (1 Ch.) |
| 481 | AUTO (2 Ch.) |
| 482 | PPP (56K) |
| 483 | PPP (64K) |
| 484 | PPP (112K) |
| 485 | PPP (112K,PAP) |
| 486 | PPP (112K,CHAP) |
| 487 | PPP (112K,MSCHAP) |
| 488 | PPP (128K) |
| 489 | PPP (128K,PAP) |
| 490 | PPP (128K,CHAP) |
| 491 | PPP (128K,MSCHAP) |
| 500 | V.120 (64K) |
| 501 | V.120 (56K) |
| 502 | V.120 (112K) |
| 503 | V.120 (128K) |
| 504 | X.75 (64K) |
| 505 | X.75 (128K) |
| 506 | X.75 (T.70) |
| 507 | X.75 (BTX) |
| 508 | V.110 (1.2K) |
| 509 | V.110 (2.4K) |
| 510 | V.110 (4.8K) |
| 511 | V.110 (9.6K) |
| 512 | V.110 (12.0K) |
| 513 | V.110 (14.4K) |
| 514 | V.110 (19.2K) |
| 515 | V.110 (28.8K) |
| 516 | V.110 (38.4K) |
| 517 | V.110 (57.6K) |
| 518 | Analog (V.34/V.90) |
| 550 | ESS5 (AT&T) (North America) |
| 551 | AT&T Point to Multipoint |
| 552 | National ISDN 1 (NI-1) |
| 553 | Northern Telecom DMS 100 (NT1) |
| 554 | NTT INS64 (Japan) |
| 555 | European ISDN (DSS1) |
| 556 | German National (1TR6) (rarely used) |
| 557 | French National (VN3) (rarely used) |
| 558 | Belgium National (rarely used) |
| 559 | Australian National (rarely used) |
| 560 | Unknown switch |
| 570 | The ISDN Configuration for this modem is not complete. Please fill out the information in the ISDN Tab before using this modem. |
| 600 | PPP (56K,GSM) |
| 601 | PPP (64K,GSM) |
| 602 | V.120 (64K,GSM) |
| 604 | V.110 (1.2K,GSM) |
| 605 | V.110 (2.4K,GSM) |
| 606 | V.110 (4.8K,GSM) |
| 607 | V.110 (9.6K,GSM) |
| 608 | V.110 (12.0K,GSM) |
| 609 | V.110 (14.4K,GSM) |
| 610 | V.110 (19.2K,GSM) |
| 611 | V.110 (28.8K,GSM) |
| 612 | V.110 (38.4K,GSM) |
| 613 | V.110 (57.6K,GSM) |
| 614 | Analog RLP |
| 615 | Analog NRLP |
| 616 | GPRS |
| 617 | PIAFS - incoming |
| 618 | PIAFS - outgoing |
| 700 | Use current TAPI location |
| 2006 | Attached To |
| 2007 | Not present |
| 2008 | Not functional |
| 2009 | Needs reboot |
| 2010 | #To finish setting up your modem, you must restart your computer. Do you want to restart your computer now? |
| 2011 | Modem not properly installed |
| 2012 | Unknown port |
| 3000 | Modem Setup |
| 3018 | Modems |
| 3019 | Installs a new modem and changes modem properties. |
| 3053 | The modem properties cannot be displayed because the modem is not available. Restart the system and try again. |
| 3054 | Properties for Modems |
| 3060 | Are you sure you want to remove the selected modem(s) from your system? |
| 3061 | Windows was unable to remove the modem '%1' from %2. |
| 3062 | Modem |
| 3069 | There is not enough memory to open the modem control panel. Close some programs and try again. |
| 3073 | You must be a System Administrator to install a modem. |
| 3074 | No modems are installed. You must be a System Administrator to install a modem. |
| 3076 | You must shut down and restart your computer before the new settings will take effect. Do you want to restart your computer now? |
| 3077 | Network Settings Change |
| 3200 | 300 Baud |
| 3201 | 1200 Baud |
| 3202 | 2400 Baud |
| 3203 | 9600 Baud |
| 3204 | 19.2K Baud |
| 3205 | 38.4K Baud |
| 3206 | 57.6K Baud |
| 3207 | No response |
| 3212 | Command |
| 3213 | Response |
| 3214 | The port that the modem is attached could not be opened. This may be the result of a hardware conflict. Check the device manager to verify all devices are functional. |
| 3215 | The port that the modem is using is currently open by another application. Exit any application that may currently be using the port. |
| 3218 | OpenComm |
| 3221 | 115K Baud |
| 3222 | Updating |
| 3223 | Error |
| 3233 | Success |
| 3236 | The modem failed to respond. Make sure it is properly connected and turned on. If it is an internal modem or is connected, verify that the interrupt for the port is properly set. |
| 3237 | COMMAND NOT SUPPORTED |
| 3238 | Field |
| 3239 | Value |
| 3240 | Default Preferences |
| 3241 | Connection Preferences |
| 6144 | Japan |
| 6145 | Albania |
| 6146 | Algeria |
| 6147 | American Samoa |
| 6148 | Germany (Country/region code 04) |
| 6149 | Anguilla |
| 6150 | Antigua and Barbuda |
| 6151 | Argentina |
| 6152 | Ascension Island |
| 6153 | Australia |
| 6154 | Austria |
| 6155 | Bahamas |
| 6156 | Bahrain |
| 6157 | Bangladesh |
| 6158 | Barbados |
| 6159 | Belgium |
| 6160 | Belize |
| 6161 | Benin |
| 6162 | Bermuda |
| 6163 | Bhutan |
| 6164 | Bolivia |
| 6165 | Botswana |
| 6166 | Brazil |
| 6167 | Country/region code (23) |
| 6168 | British Indian Ocean Territory |
| 6169 | British Virgin Islands |
| 6170 | Brunei |
| 6171 | Bulgaria |
| 6172 | Myanmar |
| 6173 | Burundi |
| 6174 | Belarus |
| 6175 | Cameroon |
| 6176 | Canada |
| 6177 | Cape Verde |
| 6178 | Cayman Islands |
| 6179 | Central African Republic |
| 6180 | Chad |
| 6181 | Chile |
| 6182 | China |
| 6183 | Colombia |
| 6184 | Comoros |
| 6185 | Republic of the Congo |
| 6186 | Cook Islands |
| 6187 | Costa Rica |
| 6188 | Cuba |
| 6189 | Cyprus |
| 6190 | Czech Republic |
COM Classes/Interfaces
There is no type library in this file with COM classes/interfaces information
Exported Functions List
The following functions are exported by this dll:| CountryRunOnce | InvokeControlPanel | ModemCplDlgProc | ModemPropPagesProvider |
| QueryModemForCountrySettings | UnimodemDevConfigDialog | UnimodemGetDefaultCommConfig | UnimodemGetExtendedCaps |
| drvCommConfigDialogA | drvCommConfigDialogW | drvGetDefaultCommConfigA | drvGetDefaultCommConfigW |
| drvSetDefaultCommConfigA | drvSetDefaultCommConfigW |
Imported Functions List
The following functions are imported by this dll:- msvcrt.dll:
_XcptFilter _amsg_exit _except_handler4_common _initterm _snprintf_s _strnicmp _vsnwprintf free malloc memcmp memcpy memmove memset sprintf_s strcpy_s swprintf_s wcscat_s wcscpy_s wcsncpy_s - ADVAPI32.dll:
RegCloseKey RegCreateKeyExW RegDeleteKeyW RegDeleteValueW RegEnumKeyExA RegOpenKeyExA RegOpenKeyExW RegQueryValueExA RegQueryValueExW RegSetValueExA RegSetValueExW - KERNEL32.dll:
ClearCommError CloseHandle CompareStringW CreateEventW CreateFileW CreateProcessW DisableThreadLibraryCalls EscapeCommFunction FindClose FindFirstFileW FormatMessageW FreeLibrary GetCommState GetCommTimeouts GetCurrentProcess GetCurrentProcessId GetCurrentThreadId GetDefaultCommConfigW GetFileAttributesW GetLastError GetLocaleInfoW GetModuleFileNameW GetModuleHandleA GetModuleHandleW GetOverlappedResult GetProcAddress GetProcessHeap GetSystemTimeAsFileTime GetTickCount GetVersion GetWindowsDirectoryW HeapFree InterlockedCompareExchange InterlockedExchange LoadLibraryA LoadLibraryW LocalAlloc LocalFree MulDiv MultiByteToWideChar OutputDebugStringA PurgeComm QueryPerformanceCounter ReadFile SetCommState SetCommTimeouts SetDefaultCommConfigW SetFilePointer SetLastError SetUnhandledExceptionFilter Sleep TerminateProcess UnhandledExceptionFilter WideCharToMultiByte WriteFile lstrcmpW lstrcmpiA lstrcmpiW lstrlen lstrlenW ntdll!RtlAllocateHeap ntdll!RtlDeleteCriticalSection ntdll!RtlEnterCriticalSection ntdll!RtlInitializeCriticalSection ntdll!RtlLeaveCriticalSection - ntdll.dll:
RtlAnsiStringToUnicodeString RtlFreeAnsiString RtlInitAnsiString RtlInitUnicodeString - SETUPAPI.dll:
SetupDiCallClassInstaller SetupDiDestroyDeviceInfoList SetupDiEnumDeviceInfo SetupDiGetClassDevsW SetupDiGetDeviceInstallParamsW SetupDiGetDeviceInstanceIdW SetupDiGetDeviceRegistryPropertyW SetupDiOpenDevRegKey SetupDiSetClassInstallParamsW SetupDiSetDeviceRegistryPropertyW cfgmgr32!CM_Get_DevNode_Status cfgmgr32!CM_Open_DevNode_Key - SHELL32.dll:
RestartDialogEx - USER32.dll:
CharNextA CheckDlgButton ClientToScreen CreateDialogParamW DestroyMenu DestroyWindow DialogBoxParamW DispatchMessageW EnableMenuItem EnableWindow EndDialog GetClientRect GetCursorPos GetDlgItem GetFocus GetKeyState GetParent GetSubMenu GetSysColor GetSystemMetrics GetWindowLongW GetWindowTextA GetWindowTextLengthW GetWindowTextW IsCharAlphaNumericW IsCharAlphaW IsDialogMessageW IsDlgButtonChecked IsWindowEnabled LoadCursorW LoadIconW LoadMenuW LoadStringW MessageBoxIndirectW MessageBoxW PeekMessageW PostMessageW RegisterDeviceNotificationA ScreenToClient SendMessageW SetActiveWindow SetCursor SetDlgItemTextW SetFocus SetWindowLongW SetWindowTextW ShowWindow TrackPopupMenu TranslateMessage UnregisterDeviceNotification UpdateWindow ntdll!NtdllDialogWndProc_W - ole32.dll:
CoGetObject CoInitialize combase!CoUninitialize combase!StringFromGUID2 - OLEAUT32.dll:
SysAllocString SysFreeString - uniplat.dll:
UnimodemNotifyTSP WinntIsWorkstation